AV123 ELT-1 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Nein AV123 ELT-1 herunter. LR706FS LR706DS_A v-1-7 ELT Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 1
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHT
All A1 Stratum towbars are finished with our unique powder coat.
A1 Towing Limited, Parkway Link, Kettlebridge Road, Sheffield, S9 3AJ
T: 0800 404 7070 F: 0845 30 10 476 E: technical[email protected]
www.a1tow.com
LANDROVER FREELANDER 2
e11*94/20*7173*02
1.Remove the left hand rear reflector from the rear bumper and drill 2 x 20mm diameter holes at 120mm centres as shown in
diagram. Remove lower fixings from bumper.
2. Loosely attach angle AN to left hand chassis using bolt H with washer WA.
3. Insert mainframe CB between the rear towing eye and angle AN and loosely attach to angle AN using fasteners B and C.
4. Loosely attach mainframe CB to the original hole in towing eye using bolt I with washers WB and SW. Remove the rear most
bolt attaching towing eye to vehicle and loosely attach angle bracket AB to vehicle towing using original bolt.
5. Loosely attach angle bracket AB to mainframe CB using fasteners E with washers WB.
6. Remove the two original nuts attached to the rear panel using the two holes drilled through the bumper.
7. Loosely attach left strap LS to the rear panel using the original nuts. Loosely attach left strap LS to angle AN using fasteners H
with washers WA.
8. Attach flange neck F or detachable neck D to mainframe CB using fasteners A or Z.
9. Tighten and check all fasteners and replace reflector and bumper fixings.
LR706FS
LR706DS
Components Bolt Kit
Code
Quantity
Description Code
Quantity
Description
Mainframe
CB 1
Crossbar
WB 2
10mm Large Round Washers
AN 1
Angle
SW 1
10mm Small Round Washers
AB 1
Angle Bracket
WA 2
14mm Large Round Washers
LS 1
Left Strap
H 2
14x90 Bolts & Grip Washers
E 2
10x40 Bolts, Nuts & Grip Washers
I 1
10x40 Bolts & Grip Washers
B 1
12x35 Bolts, Nuts & Grip Washers
C 1
12x35 Bolts & Grip Washers
Flange Neck
F 1
Flange Neck
G 2
16x50 Set Screws, Nuts & Grip Washers
AV123 1
Towball Cover
A 2
12x100 Bolts Nuts & Grip Washers
Detachable Neck
D 1
Detachable Towbar Neck & Housing
Z 4
12x25 Set Screws & Sprung Washers
AV124 1
Towball Cap
AM173 1
Electrical Socket Mounting Plate
AN208 1
Dust Cover
AN3nn 2
Keys
AN209 1
Operating Manual
W 545
Including Stratum
Powder Coat Finish
Rev 1:7
Seitenansicht 0
1

Inhaltsverzeichnis

Seite 1 - LANDROVER FREELANDER 2

PLEASE REFER TO YOUR VEHICLE HANDBOOK FOR THE MAXIMUM TOWING WEIGHTAll A1 Stratum towbars are finished with our unique powder coat.A1 Towing Limited,

Kommentare zu diesen Handbüchern

Keine Kommentare